Oil-stop cable solves a familiar problem at Mercedes-Benz
We have addressed the problem and are the first to offer a suitable oil-stop cable in the Elparts range on the independent automotive spare parts market. In the future, there will no longer be any trouble with oil loss and associated repair costs: The problem was solved by incorporating fine copper sleeves into the two lines of the oil-stop cable and also wrapping the cables with a heat shrink tube. Replacing the cable is also easier than you might think. The harness is detached from the sensor and the oil-stop cable is inserted between the connection on the sensor and the old harness.
Which engines are affected? Almost of Mercedes-Benz petrol engines beginning with the engine codes M111 and M271. Among others, this includes C-, CLK-, CLS- and E-Class models, in addition to the Sprinter series.
We now also offer the oil-stop cable in a set with the actuating solenoid (article number: 70277300). Both variants are now available in our Elparts range.
Connecting cable, camshaft adjuster actuating solenoid
Article number: 51277300
Connecting cable, camshaft adjuster actuating solenoid
Article number: 51277375 (with actuating solenoid)
Please note that the picture is only for web! For printable images please contact Ms. Kipphan:
anika.kipphan@herthundbuss.com
Herth+Buss Fahrzeugteile GmbH & Co. KG – English press compartment
Dieselstraße 2-4
63150 Heusenstamm
Telefon: +49 (6104) 608-0
Telefax: +49 (6104) 650-75
http://www.herthundbuss.com
Telefon: +496104 608268
E-Mail: anika.kipphan@herthundbuss.com