Mawson Drills 15.3 Metres at 2.2 G/T Gold and 2.1% Antimony at Sunday Creek in Victoria, Australia

Highlights: 

• Diamond drillhole MDDSC015A, the deepest hole drilled to date at the Apollo mine area (Tables 1-3, Figures 1-3) intersected (lower cut of 0.3 g/t Au cut over 2.0 metre width, with higher grades reported with a 5 g/t Au cut over 1.0 metre):

– 6 metres @ 1.6 g/t Au and 0.1% Sb (1.7 g/t AuEQ) from 222 metres; and

– 15.3 metres @ 2.2 g/t Au and 2.1% Sb (4.3 g/t AuEQ) from 231.4 metres

• Including 0.8 metres @ 1.1 g/t Au and 6.8% Sb (7.8 g/t AuEQ) from 232.3 metres
• Including 0.5 metres @ 6.6 g/t Au and 15.3% Sb (21.9 g/t AuEQ) from 238.1 metres
• Including 2.8 metres @ 5.7 g/t Au and 5.5% Sb (11.1 g/t AuEQ) from 241.3 metres
• Including 0.5 metres @ 10.1 g/t Au and 0.7% Sb (10.8 g/t AuEQ) from 245.6 metres

• Diamond drillhole MDDSC013A, the most south-easterly hole at Apollo, intersected (Tables 1-3, Figures 1-3):

– 5.3 metres @ 3.1 g/t Au and 1.1% Sb (4.2 g/t AuEQ) from 111.1 metres

• Including 0.6 metres @ 4 g/t Au and 9.6% Sb (24.0 g/t AuEQ) from 111.1 metres
• Including 0.6 metres @ 8.4 g/t Au and 0.01% Sb (8.4 g/t AuEQ) from 113.5 metres

• Eighteen drill holes (MDDSC001-018) for 2,968 metres have been now completed at the https://mawsongold.com/… Creekgold project. Drilling continues;

Michael Hudson, CEO, states: “Our Victorian portfolio continues to successfully deliver at Sunday Creek with the deepest hole drilled to date intersecting broad mineralization with multiple impressive higher-grade zones including 15.3 metres @ 2.2 g/t Au and 2.1% Sb (4.3 g/t AuEQ) located 50 metres down-dip from our closest drill hole. We continue to be impressed by the continuity of gold mineralization as we drill to depth, as well as the increasing antimony grades. Drilling continues as we work towards a maiden resource.”  

MDDSC015A was drilled 50 metres below Mawson’s previously reported drill hole https://mawsongold.com/…> which intersected 36.4 metres @ 2.4 g/t Au and 0.4% Sb, 2.8 g/t AuEQ from 177 metres demonstrating the consistency of mineralization continuing to depth (Figure 2 and 3).  MDDSC013 was drilled 50 metres SE of MDDSC015A and supports the interpretation that higher grade mineralization dips steeply to the NW. MDDSC014, drilled beneath the central zone, drilled under the NE plunging enveloping mineralized surface, intersected low-grade mineralization, with a near-surface best result of 1 metre @ 0.6 g/t Au from 8.2 metres. MDDSC013 and MDDSC015 were abandoned at shallow depths due to hole deviation near their collars and redrilled as MDDSC013A and MDDSC015A respectively.

Mawson has now completed eighteen drill holes (MDDSC001-018) for 2,968 metres at the https://mawsongold.com/… Creek gold-antimony project. Drilling continues and assays from 15 out of the 18 finalized holes have been released. Geophysical surveys (3D induced polarization and ground magnetics) and detailed LiDAR surveys have been completed. A 2,500-point soil sampling program at Sunday Creek is near completion extending east-northeast from drilling areas to test the 11-kilometre trend of historic epizonal dyke-hosted mineralization within Mawson’s tenured areas. The integration of the LiDAR, soil sampling data, rock chips and geophysics is key to the expansion of the project along strike.

At Sunday Creek, historic gold mining occurred between 1880 and 1920 over a greater than 11-kilometre strike length. Drilling during 1990-2000s focused on shallow, previously mined surface workings, covering an area of 100 metres in width, 800 metres length but, only to 80 metres average depth. As such, the entire field remains open along strike and to depth. Apollo was the original deepest shaft to 100 metres in the late 1800s in a series of sheeted stibnite-rich veins, predominately hosted within a zone of felsic dykes and related alteration that broadly controls gold distribution.

Mineralization at Sunday Creek is hosted in late-Silurian to early-Devonian-aged shales and siltstones containing a series of dykes of felsic-intermediate composition. Gold is concentrated mainly in and around the north dipping and EW to NE-SW striking felsic dykes and the halo of associated pre-mineralization dyke-related sericite-pyrite alteration. The mineralization generally lies within brittle multiple sheeted veins and cataclastic zones. Individual NW striking high-grade quartz-stibnite veins at Apollo and Golden Dyke, and cataclastic zones at Gladys were the focus of historical mining at Sunday Creek. These zones have been proven to continue to depth by Mawson. Broader vein-hosted and cataclastic mineralization grading less than 15 g/t gold appears untouched by the historic miners.

Technical and Environmental Background

Tables 1–3 provide collar and assay data. The true thickness of the mineralized interval is interpreted to be approximately 70% of the sampled thickness. Gold-only intersections are reported with a lower-cut of 0.5 g/t gold over a 2.5 metre width except on the edge of calculated intervals where 1 metre @ >2.0 g/t gold was applied. No upper cut-off was applied.

A diamond drill rig from contractor Starwest Pty Ltd was used in the program. Core diameter is HQ (63.5 mm) and oriented with excellent core recoveries averaging close to 100% in both oxidized and fresh rock. After photographing and logging in Mawson’s core logging facilities in Nagambie, intervals were diamond sawn in half by Mawson personnel. Half core is retained for verification and reference purposes. Analytical samples are transported to On Site Laboratory Services’ Bendigo facility which operates under both an ISO 9001 and NATA quality systems. Samples were prepared and analyzed for gold using the fire assay technique (25 gram charge), followed by measuring the gold in solution with flame AAS equipment. Samples for multi-element analysis use aqua regia digest and ICP-MS methods. The QA/QC program of Mawson consists of the systematic insertion of certified standards of known gold content and blanks within interpreted mineralized rock. In addition, On Site inserts blanks and standards into the analytical process.

Gold Equivalent Calculation

It is the opinion of Mawson that all the elements included in the metal equivalent calculation have a reasonable potential to be recovered. The gold equivalent (AuEQ) was calculated based on commodity prices as 21 March 2021. The AuEQ formula is as follows: AuEQ(g/t) = (Aug/t) + (XX * Sb%), where XX = (US$5,600/100) / (US$1,750/31.1035) and the gold price = US$1,750/oz and antimony price = US$5,600/tonne.

Qualified Person

Mr. Michael Hudson (FAusMM), Chairman and CEO for the Company, is a qualified person as defined by National Instrument 43-101 – Standards of Disclosure or Mineral Projects and has prepared or reviewed the preparation of the scientific and technical information in this press release.

About Mawson Gold Limited (TSX:MAW, FRANKFURT:MXR, OTCPINK:MWSNF)

http://www.mawsongold.com/… Gold Limited is an exploration and development company. Mawson has distinguished itself as a leading Nordic Arctic exploration company with a focus on the flagship Rajapalot gold-cobalt project in Finland. Mawson also owns or is joint venturing into three high-grade, historic epizonal goldfields covering 470 square kilometres in Victoria, Australia and is well placed to add to its already significant gold-cobalt resource in Finland.

On behalf of the Board,

 "Michael Hudson"                 

Michael Hudson, Chairman & CEO

Further Information

www.mawsongold.com>

1305 – 1090 West Georgia St., Vancouver, BC, V6E 3V7

Mariana Bermudez (Canada), Corporate Secretary, +1 (604) 685 9316, info@mawsongold.com

In Europe:

Swiss Resource Capital AG

Jochen Staiger

info@resource-capital.ch

http://www.resource-capital.ch">www.resource-capital.ch>

Forward-Looking Statement

This news release contains forward-looking statements or forward-looking information within the meaning of applicable securities laws (collectively, "forward-looking statements"). All statements herein, other than statements of historical fact, are forward-looking statements. Although Mawson believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are typically identified by words such as: believe, expect, anticipate, intend, estimate, postulate, and similar expressions, or are those, which, by their nature, refer to future events. Mawson cautions investors that any forward-looking statements are not guarantees of future results or performance, and that actual results may differ materially from those in forward-looking statements as a result of various factors, including, but not limited to, timing and successful completion of drill programs planned at Sunday Creek, capital and other costs varying significantly from estimates, changes in world metal markets, changes in equity markets, the potential impact of epidemics, pandemics or other public health crises, including the current pandemic known as COVID-19 on the Company’s business, planned drill programs and results varying from expectations, delays in obtaining results, equipment failure, unexpected geological conditions, local community relations, dealings with non-governmental organizations, delays in operations due to permit grants, environmental and safety risks, and other risks and uncertainties disclosed under the heading "Risk Factors" in Mawson’s most recent Annual Information Form filed on http://www.sedar.com">www.sedar.com>. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, Mawson disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise.