MAIJA milling discs in automation and with heated components
A special field of application for MAIJA milling discs is work on highly heated components. To demonstrate its use, a rail was heated so that it had a temperature of 430°C during machining. As an example, welds were leveled during the demonstration, but it is just as possible to open welds to correct any welding defects that may be present, prepare the weld to be metallically bright, and weld again. To carry out this work with a grinding/roughing wheel, the component would first have to be cooled down and, if necessary, then heated up again. With the MAIJA milling discs, this work can be carried out directly while the part is still hot, thus saving a great deal of time. Due to the location-independent use of the milling discs, this is possible wherever it is needed, without having to transport the component to be machined.
Maija-Frästechnik GmbH, founded in 2012, develops, produces and sells high-quality milling tools made of hard metal. The company owns the patent for milling discs, which was registered in 2000 by the later company founder.
Today it supplies the metalworking industry worldwide in a wide variety of sectors, including ship and yacht construction, container construction, commercial vehicle construction, rail vehicle construction and foundries.
The milling discs were awarded with the German prize for resource efficiency in 2015 – the Federal Ministry of Economics and Technology honored Maija-Frästechnik GmbH for the efficient use of limited resources in 2015.
Ministry and experts were convinced about the recyclability of the milling chips, which – in contrast to abrasive dust – can be reused without major effort.
Maija Frästechnik GmbH
Kölner Straße 199
58256 Ennepetal
Telefon: +49 (2333) 86977-05
Telefax: +49 (2333) 86170-62
http://www.maija-fraestechnik.de/
CEO
Telefon: +49 (0)2333 869 77 05
Fax: +49 (0)2333 861 70 62
E-Mail: m.haertel@maija-fraestechnik.de
