• Software

    Making collaboration in construction projects more successful

    With the latest version of its BIM software Allplan 2021, project supply chains reach a new level in interdisciplinary collaboration: models, data and information from various specialist disciplines can be brought together thanks to both local and cloud-based technology. This enables integrated workflows and efficient information management – key requirements for the success of construction projects. "ALLPLAN has always been committed to openBIM, as only open standards enable the successful implementation of BIM workflows in heterogeneous system landscapes," says Thomas Müller, Product Manager Interoperability at ALLPLAN. "Open data standards contribute significantly to the advancing digitalization of the construction industry. They are the basis for efficient data exchange and ensure that…

  • Software

    Allplan Bimplus unterstützt beim Bau der größten Schleuse der Welt

    Sassevaart, ein Joint Venture bestehend aus DEME Infra Marine Contractors, Dredging International, BAM Infra, BAM Contractors und Van Laere, setzt bei der Planung der neuen Terneuzen Schleuse in den Niederlanden auf BIM und Allplan Bimplus als Datenmanagement-Plattform für die Bewehrung. Allplan Bimplus ermöglicht es, Informationen über alle Disziplinen hinweg entlang des gesamten Projektlebenszyklus zu nutzen und sorgt somit für eine reibungslose Zusammenarbeit. Mit 427 Metern Länge, 55 Metern Breite und 16,4 Metern Tiefe wird die neue Terneuzen Schleuse nach ihrer Fertigstellung eine der größten Schleusen der Welt sein. Ab 2023 soll sie Platz für größere Schiffe bieten und die Kapazität auf der Schifffahrtsroute zwischen Paris und Rotterdam erweitern. Die Binnenschifffahrtsroute…

  • Software

    How Allplan Bimplus Helps to Build one of the biggest Locks in the World

    Sassevaart, a joint venture consisting of DEME Infra Marine Contractors, Dredging International, BAM Infra, BAM Contractors and Van Laere, has chosen BIM and Allplan Bimplus as its reinforcement data management platform for the New Lock Terneuzen in the Netherlands. Allplan Bimplus enables information to be used across all disciplines and throughout the entire project lifecycle, thus ensuring that works progresses as efficiently as possible. As one of the largest locks in the world, the new lock will be 427 meters long, 55 meters wide, and 16.4 meters deep. In 2023, the New Lock Terneuzen, Netherlands will accommodate larger vessels and enlarge capacity along the important shipping route between Paris and…

  • Software

    ALLPLAN and Precast Software Engineering merge their Competences to Strengthen the Position in the Engineering and Construction Market

    ALLPLAN, global provider of BIM solutions for the AEC industry, and Precast Software Engineering based in Salzburg, Austria, today announced that they join forces to strengthen their delivery capabilities in the engineering and construction market. Precast Software Engineering has been providing software solutions and services for the industrialized construction industry for three decades. „This is an important milestone for ALLPLAN, which will extend the seamless BIM workflow from engineering to construction“, says Dr. Detlef Schneider, CEO of ALLPLAN. “Combining engineering and precast manufacturing competence will create a unique solution from architectural design through structural engineering to manufacturing and construction that supports the growing demand of lean and industrialized construction processes.…

    Kommentare deaktiviert für ALLPLAN and Precast Software Engineering merge their Competences to Strengthen the Position in the Engineering and Construction Market
  • Software

    ALLPLAN und Precast Software Engineering bündeln Kompetenzen und stärken ihre Position im Markt für Ingenieur- und Bauwesen

    ALLPLAN, globaler Anbieter von BIM-Lösungen für die AEC-Branche, und Precast Software Engineering mit Sitz in Salzburg haben heute bekannt gegeben, dass sie ihre Kräfte bündeln werden und somit ihre Position im Markt für Ingenieurbau und Bauwesen stärken werden. Precast Software Engineering bietet seit drei Jahrzehnten Softwarelösungen und Dienstleistungen für Fertigteilwerke an. “Das ist ein wichtiger Meilenstein für ALLPLAN, der den nahtlos integrierten BIM-Workflow von der Planung bis zur Fertigung und Bauausführung ermöglicht”, sagt Dr. Detlef Schneider, CEO von ALLPLAN. "Durch die Bündelung von Tragwerkplanungs- und Fertigteilkompetenz entsteht eine einzigartige Lösung, die vom Entwurf über die Tragwerksplanung und Fertigung bis hin zum Bauen reicht und somit die wachsende Nachfrage nach effizienten,…

    Kommentare deaktiviert für ALLPLAN und Precast Software Engineering bündeln Kompetenzen und stärken ihre Position im Markt für Ingenieur- und Bauwesen
  • Kooperationen / Fusionen

    Spende für den guten Zweck: ALLPLAN unterstützt Ingenieure ohne Grenzen

    Mit einer Spende von 3.000 Euro unterstützt ALLPLAN, Anbieter für BIM-Lösungen für die AEC-Industrie, die Entwicklungshilfeprojekte von Ingenieure ohne Grenzen. Der Verein hat sich zum Ziel gesetzt, die Lebensbedingungen notleidender Menschen langfristig zu verbessern. Stellvertretend für das gesamte Team übergab Karin Schmidt, Head of Education, die Spende an die Hilfsorganisation. „Soziales Engagement ist uns ein wichtiges Anliegen bei ALLPLAN“, sagt Karin Schmidt. „Wir freuen uns sehr, dass wir mit unserer Spende einen Beitrag leisten können, den Auf- und Ausbau grundlegender Infrastruktur zu unterstützen“, so Karin Schmidt weiter. Die Spendengelder kommen Entwicklungsprojekten in mehr als 30 Ländern zugute. So haben etwa in Tansania durch die Errichtung von Zisternen über 5.000 Menschen…

  • Software

    AFRY relies on software solutions from ALLPLAN

    AFRY, the international provider of engineering, design and consulting services, has opted for the latest BIM solutions from ALLPLAN for the design of its major infrastructure construction projects. The engineers use Allplan Bridge for modeling, structural analysis, and design of curved bridges and Allplan for all other engineering structures in their projects. AFRY is thus pursuing the goal of designing intelligent traffic infrastructure efficiently and across teams while ensuring high model quality. AFRY was created in 2019 from the Swedish company ÅF and the Finnish company Pöyry. Headquartered in Stockholm, the service provider employs 17,000 people, making it one of the world’s largest companies for engineering and consulting services. In…

  • Bautechnik

    AFRY setzt auf Softwarelösungen von ALLPLAN

    Für die Planung seiner Großprojekte im Infrastrukturbau hat sich der internationale Anbieter von Engineering, Design und Beratung, AFRY, für die neuesten BIM-Lösungen von ALLPLAN entschieden. Die Ingenieure nutzen Allplan Bridge für die Modellierung, statische Berechnung und Konstruktion von gekrümmten Brücken sowie Allplan für alle sonstigen Ingenieurbauwerke bei ihren Projekten. Damit verfolgt AFRY das Ziel, intelligente Verkehrsinfrastruktur effizient und teamübergreifend zu planen und gleichzeitig eine hohe Modellqualität sicherzustellen. AFRY ist 2019 aus dem schwedischen Unternehmen ÅF und dem finnischen Unternehmen Pöyry entstanden. Der Dienstleister mit Hauptsitz in Stockholm beschäftigt 17.000 Mitarbeiter und gehört damit zu den weltweit größten Unternehmen für Ingenieur- und Beratungsdienstleistungen. In Deutschland bearbeiten 500 Expertinnen und Experten an 16…

  • Software

    First 3D-Printed House in Germany Realized with Support from Allplan

    Germany’s first 3D-printed single-family home is being built in Beckum. It was planned by the office MENSE-KORTE ingenieure +architekten using the BIM software Allplan. The 3D printing pioneers see enormous potential in the new technology. The project is being realized by the HOUS3DRUCK building owners‘ association, which also includes Waldemar Korte from MENSE-KORTE ingenieure +architekten. The architects see a whole range of advantages in the machine production method: "3D printing offers a high degree of design freedom, which could only be realized with a high financial outlay in conventional construction methods", says office owner Waldemar Korte. As with other printed houses, the principle of contour crafting is also followed in…

  • Software

    Erstes 3D-gedrucktes Haus in Deutschland mit Unterstützung von Allplan realisiert

    In Beckum entsteht Deutschlands erstes Einfamilienhaus aus dem 3D-Drucker. Geplant wurde es von dem Büro MENSE-KORTE ingenieure +architekten mit der BIM-Software Allplan. Die 3D-Druck-Pioniere sehen enormes Potenzial in der neuen Technologie. Realisiert wird das Projekt von der Bauherrengemeinschaft HOUS3DRUCK, zu der auch Waldemar Korte vom Büro MENSE-KORTE ingenieure +architekten gehört. Die Architekten sehen eine ganze Reihe von Vorteilen in der maschinellen Fertigungsmethode: „Der 3D-Druck bietet ein hohes Maß an Designfreiheit, die in herkömmlicher Bauweise nur mit hohem finanziellen Aufwand zu realisieren wäre“, so der Büroinhaber Waldemar Korte. Wie bei anderen gedruckten Häusern folgt man auch in Beckum dem Prinzip des contour crafting, bei dem Gebäudeteile – oder eben ein ganzes…

    Kommentare deaktiviert für Erstes 3D-gedrucktes Haus in Deutschland mit Unterstützung von Allplan realisiert