-
A Secure Connection – TEleMax RF-Switch-Matrix Systems by Telemeter Electronic
Switching with limitless flexibility – ready for immediate use. Following this concept, Telemeter Electronic develops and manufactures custom-configured switching systems, supporting various applications in research laboratories, manufacturing, testing applications, and final inspections. RF-matrix switches allow rapid and flexible signal distribution without manual connections. They enhance user convenience and increase switching speeds in industrial applications. These matrix switches find utility in production environments, test labs, and equipment testing. Telemeter Electronic provides tailored solutions, from housing design to integration with RF-switches in diverse configurations. A touchscreen interface and various interfaces facilitate operation and integration. A sophisticated system architecture enables high customization at attractive terms, adaptable to changing conditions. Additional functionalities are available…
-
The Expansion of a Success Story – New Space-Saving Designs for RF-switches
For over five years now, TEleRel brand RF switches have been highly successful in the market, firmly established in numerous demanding applications among Telemeter Electronic’s customers. Offering a broad frequency range from DC to 67 GHz (depending on the model) and various base models (DPDT relays, SPDT relays, multiple switches with up to 18 individual switch positions), these switches always provide the ideal solution for specific applications. Similar to all RF switches, customers can choose from numerous additional options such as latching functionality, TTL drivers, extended temperature ranges, or moisture protection. The guaranteed lifespan of 1 million switching cycles ensures the highest reliability — especially in safety-critical application areas. For…
-
Customized Heating Systems by Telemeter Electronic
Innovative temperature control systems need to be up-to-date, ready for deployment, and ideally available on short notice. While there is an abundance of heating technologies, a tailored solution as a complete assembly for mass production is often not readily available. At Telemeter Electronic GmbH, customers find a heating method customized specifically for their needs. The application scope is diverse, spanning various fields such as medical, dental, laboratory equipment and systems, as well as MIL and industrial applications. For instance, Telemeter Electronic can vulcanize a silicone heating film onto a pre-designed surface. Embedding temperature sensors, fuses, or thermostats is also feasible. Stainless steel or aluminum oxide heaters are precision-manufactured, including round…
-
Robust High-Voltage Cables with PTFE Insulation
PTFE insulation offers high packing density, resulting in a smaller outer diameter compared to other insulation types. Additionally, these cables are ideal for use in challenging conditions. PTFE-insulated HV cables are UV-resistant and possess high mechanical stability. The temperature range spans from -65°C to 200°C. The cables are chemically resistant to oils, alcohols, gasoline, and exhibit high dielectric strength. At Telemeter Electronic, customers can find Hi-Voltage cables ranging from 9 kV DC (4 kV AC) to 50 kV DC (22 kV AC) available in shielded or unshielded configurations. Aside from the standard red color, these high-voltage cables are also available in other color variations upon request. Telemeter’s robust high-voltage cables…
-
High precision cooled laser diodes
Laser diodes in detector/laser applications require cooling. The miniature or multi-stage Peltier elements of P&N Europe are particularly suitable for this. These elements are suitable for various cooling and heating applications where only a limited area and a small amount of cooling or heating is involved. Peltier elements from P&N Europe generate high cooling power, so that the temperature can be set precisely. The great advantages of these Peltier elements are durability, reliability and most important quality. When using lasers, it is important that the composition is free of impurities. P&N Europe has special cleaning procedures and provides suitable packaging. P&N Europe develops the perfect solution for customers, as well…
-
Climate Chambers with Peltier Technology
P&N Europe designs and manufactures a variety of thermoelectric assemblies for customers in a wide range of applications. Climate chambers are one of the most popular applications for using P&N Europe’s coolers. P&N Europe’s thermoelectric coolers are used to regulate temperature inside climate chambers. They are designed in such a way that after installation to a chamber, the interior of the cabinet is sealed against the outside. The heat is absorbed and dissipated by heat exchangers, which can be equipped with fans on both the cold side (inside) and the hot side (outside). Coolers from P&N Europe are highly reliable, maintenance-free and have outstanding performance. The operation is almost wear-free…
-
Flexible mobile anechoic chambers for demanding measurements
In the most areas of electrical engineering, demanding measurement tasks require a defined and interference-free environment for highly accurate measurement results. The measurement chamber concept developed by Telemeter Electronic offers customers a flexible measuring solution that is always tailored to the specific requirements – from simple measuring boxes to fully automated chambers. These measuring chamber solutions find a wide range of applications, such as in laboratories for EMC pre-compliance measurements, for functional testing of products or also for measurements in quality assurance. Depending on the application, the chambers can be used in a frequency range between 100 kHz and 110 GHz and provide an average shielding effectiveness of 60 to…
-
Full-Polyimide heater for particular applications
Beyond the standard heater with Kapton® insulation, Telemeter Electronic offers Full-Polyimide heating foils for your special application. The main difference is to replace the usual adhesive material with the primary material "KAPTON®". This process of layer construction and the realization of the connection according to IPC 2223 offers the following advantages: • -200°C to +300°C • UL 94V-0 • Increased reliability • Improved material properties • Halogen free material • Lower outgassing Über Telemeter Europe Telemeter Electronic has been a certified sales and service company since 1964, with a focus on solution oriented thinking and acting. We are technically competent partners for our customers and attach great importance to personal…
-
… efficient and professional thermoelectric cooling
There is no other component, which is more efficient if limited space and precise cooling is required. Peltier elements from Telemeter Electronic also ensure an efficiency, which is essential in many applications. Our elements are not only available as single components, but also assembled with heat sink and fan. Optimization of shape, size or performance is for your special series application is our daily business. Due to the change of the economic policy and further hurdles i.e. material procurement, leads to delayed shipments and thus also in some cases to production stops. To avoid any of these bottlenecks, Telemeter Electronic can support you by providing decent delivery times, large stock…
-
RF switch with 4.3-10 connector – Always a reliable connection
The 4.3-10 connector is increasingly used in many mobile radio applications. It was originally developed to meet the growing performance requirements of mobile radio networks. It is used e.g. for the connection from the remote radio unit to the antenna, but also for splitter or filter systems. Due to this increased demand, Telemeter Electronic has further developed its TEleRel RF switches. Two important switch series are now also available with 4.3-10 connectors as a ready-to-connect solution. The 4.3-10 connector is now available for SPDT as well as SP3T to SP6T configuration. The SPDT switches are available in failsafe or latching version. The SP3T to SP6T series is available in Normally…
