• Luft- / Raumfahrt

    World‘s first StartStick starts the engines

    Quite often external ground power units are used to startup engines of helicopters or other aircraft. This procedure spares airborne battery, especially at cold weather conditions and safes the power of the airborne battery for emergencies. Moreover, engines are spooled to more revolutions per second, before fuel is injected. This result in cooler engine temperatures, hence the lifetime of the engine is extended. However, conventional ground power units contain lead batteries and weigh up to 30 – 40 kg. This heavy weight hinders to take the huge ground power units within the aircraft. The StartStick combines the outstanding performance of traditional ground power units with the low-weight of lithium- ion…

  • Elektrotechnik

    Temperature sensor in mini format – fast wins

    Due to the miniaturized design, temperature sensors can be used for static measurements as well as for the acquisition of fast, dynamic temperature changes. With the sleeve temperature sensors, one benefits from rapid response behavior coupled with comparatively high mechanical stability. The Pt100 sensor element is well protected in the 2 mm diameter stainless steel tube. Due to the accuracy class A and the 4-wire connection, precision measurements in the range from -50 °C to +260 °C are possible. NTC thermistors are also available in stainless steel tubes with a diameter of 1.5 mm for series applications. These can be used at temperatures up to +100 °C maximum. Telemeter Electronic…

  • Forschung und Entwicklung

    Miniature heating foils

    At Telemeter Electronic you can obtain heating foils even with the smallest dimensions. This allows problematic areas to be heated in a targeted manner. For example, you can keep sensors within electronic assemblies at a constant temperature and thus significantly improve the measurement results. The mini heating foils are offered with various contacting options, such as soldering eyes or fine connecting strands in square or round form. Telemeter Electronic supplies your product according to your operating voltage and performance requirements. Also available with the proven self-adhesive film. Firmenkontakt und Herausgeber der Meldung: Telemeter Europe Joseph-Gänsler-Straße 10 86609 Donauwörth Telefon: +49 (906) 70693-0 Telefax: +49 (906) 70693-50 http://www.telemeter.info/ Ansprechpartner: Edna Seiler…

  • Maschinenbau

    High voltage cables with extreme reliability

    No compromise when dealing with high voltage cables. The new high voltage cables of the Hi-Voxtreme class from Telemeter Electronic offers he user highest reliability. Every batch of cables is 100% tested, i.e. the high voltage test is not carried out as a random sample test, but with every production lot. Highly resistant polytetrafluoroethylene is used as insulation material. This gives the high-voltage cable high resistance to ageing, not only in normal environments, but also against tough environmental influences such as UV radiation, high or low temperatures or chemical substances. Compared to other types of insulation, the outer diameter of Hi-Voxtreme cables is usually smaller. In order to guarantee the…

  • Elektrotechnik

    Unlimited flexibility with the Telemeter switch control panel!

    Telemeter Electronic has made it its aim to always find the optimum solution for its customers, therefore we can now also offer customer-specific configured switch panels. In our own development and production department we develop systems which are characterized by a wide frequency range from DC up to 40 GHz. Individual case design (as module/desktop case or plug-in unit in 19" format) and the flexible assembly by any RF components such as RF switches, attenuators, amplifier, filter and splitters are also feasible. There are two basic methods of controlling the systems: Manual operation on the device itself and remote operation via various interfaces such as RS232, LAN, USB or IEEE-488.…

    Kommentare deaktiviert für Unlimited flexibility with the Telemeter switch control panel!
  • Elektrotechnik

    Connecting through with Telemeter feedthrough filters!

    To operate devices inside a measuring chamber, a power supply nearly always must fed into the chamber. In order to avoid interferences from outside on the line, this feed-through should be filtered. Filtered voltage feedthroughs are available for exactly this purpose. Since measurements in measuring chambers can sometimes take several days, it must be ensured that overheating of the devices is detected early and further overheating is avoided. Therefore, Telemeter Electronic has equipped a feedthrough filter with additional switching relays and an external temperature sensor to be prepared for such scenarios. The filters have a voltage of 250 V AC and a maximum current rating of 16 A. Connectors such…

  • Elektrotechnik

    Coaxial switch in compact format!

    Coaxial relays in a compact design are urgently required for critical space conditions in devices and systems. For this purpose, Telemeter Electronic provides the right solution for you with miniature coaxial switches of the ARV-series. The SPDT relays are equipped with SMA or pin connectors where the pin variant has an outer dimension of only 15.9 mm x 15 mm x 11.2 mm (H x W x D). Compared to conventional SPDT relays, these switches are up to 85% smaller and still offer a remarkable performance with a VSWR of maximum 1.7 and an maximum insertion loss of 0.7 dB. Depending on the model, the frequency range extends either from…